As Tom David, an experienced waterproofing expert, said, “Roof leaks are uncalled for. You need to be prepared for the worst with the proper tools and materials.” Residents should be DIY-experts; they should know the temporary or permanent fixes to water drippings. However, if the situation goes out of hand, then Waterproofing Experts are the only choice.
Major Signs of Damaged Roofs
- Plumbing Vent Boots
Plumbing ventilation boots are composed of plastic or metal. To fix a leak, check the bases for any crevices or punctures. Thereafter, inspect the rubber boot around the pipe; it can be damaged (rot or torn), permitting water leakage in the structure. You can replace the entire boot with a new one. Or, if the base nails are not present, replace them with rubber screws.
Read More
How Do You Waterproof an RCC Slab?
How Many Days Does Waterproofing Take?
5 Causes of Leakage for Metal Roofs
- Damaged Shingles
Ensure that the shingle is repaired in time as it can leak during rain. You can also replace it with a new one.
- Ceiling Stains
If the stains are present on the ceiling or walls, there is a possible leak, which can cause problems, such as mold growth, rotten framing, and scrapped paint.
- Clogged Soffits
Soffit vents are perforated sections that allow proper air flow from attics. Dust-free soffits prevent moisture buildup and mold growth on the frames of the roof.
- Shiners
Shiners are ‘frosted nails’ at the underside of the roof. Moisture from the top-most part of a structure condenses on the nail, which defrosts in daytime and causes water droplets to fall. The process repeats on in the same way. To stop the leakage, remove the nail.
- Mold Growth at Edges
Generally, mold and mildew grow at the edges of the roof connecting to a sidewall. The best solution is the use of kick-out flashing.
- Corroded Gutters
Leaks occur at rusty areas or seams. To stop it, use a repair tape, especially designed for man-holes. However, you need to clean the area: Remove rust with a wire brush and scrape the tar with a knife.
- Mold on Exterior Walls
A leak is possible if mold is present on the wall. Try finding it on the opposite side. Look for ground sloping and downspouts.
Read More
What is the Best Cement to Stop Hydraulic Leaks?
How Can Algae and Rust Be Kept Away from Water Tanks?
Do You Need a Primer for Waterproofing?
- No Gutter Apron
Water tends to flow to the underside of the shingles and move behind the man-hole (if no apron is present). Water stains may be visible on the soffit and fascia.
- Chimney Flashing Rust
With regard to brick chimneys, rust can occur on flashing if the material is galvanized steel. To fix it, new flashing needs to be applied over it. The incoming water will be diverted.
- Stains Around a Bathroom Fan
Water stains around the bath fan may specify a leak from condensation or the vent cap. If bath fan duct is not insulated, the air (moist) will condense in the duct.
- Hail Damage
When hailstorm strikes an asphalt shingle, it can rupture or puncture it. However, it just knocks off the granules. When a shingle loses its protective layer, UV rays start to break it. The problem increases, if not treated in time.
Want To Avail The Services Of Water Leaks
So, are you ready to call up experts for roof inspection? Connect with Waterproofing Experts today. We’re recognized throughout Pakistan, especially in Lahore, Quetta, Islamabad, Sahiwal, and more. Our after-sales service, together with the main application, has been acknowledged by clients. We offer roof waterproofing services with different chemicals, such as bitumen, polyurethane, cementitious, etc. Besides tools and machinery, we also stress on using PPEs for safety purposes.
To get a quote or book an appointment, call or email to contact our representative.