Basement is one of the toughest areas to maintain a leak-proof environment. Waterproofing Experts acknowledge the fact that it is tedious to repair a basement leak, especially if it is present internally. They have to make inroads, by rupturing or breaking a certain section of the basement and installing a new object or simply, repair the area. Discover the most cheapest basement waterproofing solutions.
Basics of Basement Waterproofing
- Expose the weeping tiles by removing soil and other particles from the full wall height to the footings. The height can be eight feet deep.
- Power wash the entire area to remove loose particles or soil.
- Repair cracks or holes with hydraulic cement.
- Use a trowel to apply the liquid membrane.
- To prevent pooling, use downspouts to discharge water away from the structure.
- Clear debris from the gutters. Install gutter guards for better results.
- Install a dehumidifier to prevent condensation and maintain moisture levels.
DIY Basement Waterproofing – A Possible Scenario
Achieving favorable results with DIY basement waterproofing is not difficult, provided you are aware of all the required steps. But first, let’s list down the supplies:
- Protective gloves
- Ventilator mask
- Wire brush
- Paintbrush
- Caulk
- Aluminum foil
- Acetone
- Concrete sealant
- Masonry cleaning agent
- Wet vacuum
-
Clear Stagnant Water
To remove standing water, ensure that the electricity supply is disabled. Get a mop, towels, and wet vacuum to commence work. Dehumidifiers and fans can help the cause. You can also use bleach solution (dilute) to restrict mold and mildew growth.
-
Find the Leak Source
Tape and aluminum foil are effective tools in finding leaks within closed structures: Place 1×1 ft. of aluminum foil on the basement wall and check for condensed particles after some hours. If the foil gets wet, use a dehumidifier to remove the presence of moisture before the waterproofing process. If the moisture appears on the foil facing the wall side, you will need to waterproof the surface externally.
-
Clean & Prepare Area
Paint removal is necessary before the application of the waterproofing liquid membrane. Use gloves and ventilator mask for the entire process (cleaning to layering). Scrub the walls with a dry brush to remove dirt. Efflorescence can be removed with muriatic acid. You can apply acetone to remove paint. Rinse the wall and repeat the process to achieve the desired result.
-
Seal Crevices and Holes
Use hydraulic cement, caulk, or epoxy resin to cover cracks or holes. However, only minor crevices can be managed by chemicals. If the fissure is massive, then you will need to connect with a professional from Waterproofing Experts. Insert a caulking gun with your preferred sealer in the crack and drag it till the end. Reseal gaps in doors and windows with caulk.
-
Apply Waterproof Coating
Remove dirt and marks (oil, grease, and paint) from basement walls. Dampen the surface and apply the sealant. After the process, wipe away the excess. Silicate sealant can be applied using a roller or spray-on application. Waterproof coating can be applied with a special mop or roller.
Why Hire a Professional Waterproofing Contractor?
When DIY practices fail to cover the water leaks, it’s time to call in professionals, the best of the lot being Waterproofing Experts. Following are some critical factors that link to their hiring:
- Experience
- Proper Equipment and Information
- Adherence to Safety Standards
- Using Premium-Quality Materials
- Periodic Maintenance and Consultation
So, are you in for DIY or a professional waterproofing contractor? Connect with Waterproofing Experts, the best company in Karachi, Pakistan. Our workers have traveled across the country, working in cities like Lahore, Islamabad, Quetta, Gujranwala, Multan, and others.
To book an appointment, call, email, or message tod
